SPECTROCERTIFIED® COMPRESSIBLE
ALUMINUM SAMPLE PELLETCUP®
BRIQUETTING CUPS


Transform powdered samples into firm durable solid briquettes protected on all sides excepting for the surface to be analyzed. Minimizes potential hazards of breakage, easy to handle and introduce into briquetting dies. Simply fill a PelletCup with the powdered sample substance, place into die and briquette in usual manner.

Select from the "ORIGINAL" Tapered-Walled PelletCups® in
Aluminum and Plastic or Straight-walled


Tapered-Walled, Aluminum are the "ORIGINAL" and most popular and versatile PelletCups for briquetting a wide range of powdered samples under diversified pelletizing conditions. Taper tends to reduce cracking and fissure development. Very close outside diameter tolerance minimizes sample particles spilling over and becoming entrapped in between the inside walls of the die and pellet cup. Filled PelletCups gently float down into the die cavity on a cushion of entrapped air further reducing likelihood of spillage.

Tapered-Walled, Plastic Plastic PelletCups are similar to their “ORIGINAL” aluminum counterparts excepting shallower and accommodating less sample volume. Lubricious plastic quality helps extend die life by resistant-free pellet ejection.

Straight-Walled, Aluminum PelletCups have perpendicular walls with respect to the flat bottoms and smaller diameters. Straight-walled PelletCups are acceptable where spillage; potential cracks and fissure development from stress and strain are not important issues.

Specifications and Ordering Information

Compressible Straight-Walled Aluminum PelletCups®

CAT. NO. OUTSIDE DIAMETER HEIGHT UNITS/PKG
500 1.19" (30.3 mm) 0.33"(8.6 mm) 1000
530 1.33" (33.8 mm) 0.29"(7.3 mm) 600
540 1.53" (38.9 mm) 0.37" (9.5 mm) 600
Order Now

The "Original" Compressible Tapered-Walled Aluminum PelletCups®

CAT. NO. OUTSIDE DIAMETER HEIGHT UNITS/PKG
505 1.22" (31 mm) 0.31" 7.9 mm) 1000
535 1.36" (34.6 mm) 0.37" (9.3 mm) 600
545 1.57" (39.8 mm) 0.36" (9.1 mm) 600
547 1.76" (44.7 mm) 0.36" (9.11 mm) 600
Order Now

The "Original" Compressible Tapered-Walled PlastiCups®

CAT. NO. OUTSIDE DIAMETER HEIGHT UNITS/PKG
552 1.22" (31.0 mm) 0.25" (6.4 mm) 500
553 1.35" (34.3 mm) 0.25" 6.4 mm) 500
554 1.56" (39.7mm) 0.25" (6.4 mm) 500
Order Now

® PelletCups, SpectroCertified and Chemplex are registered trademarks of Chemplex Industries, Inc.