Spectrovial® Comminution and Blending Vials For Ball Pestle Impact Sample Grinders
SpectroVial® comminution and blending vials are uniquely designed with concaved interior ends in both the body and cap. The concaved ends eliminate pockets for sample particles to accumulate and elude the blending and grinding processes. Particle size reduction and distribution is more efficient and effective to produce more homogeneous sample mixtures. Supplied in an assortment of materials, sizes and varieties. Accommodated by all SpectroMill® Ball Pestle Impact Grinders.
Polystyrene SpectroVials®
Clear, hard and rigid plastic vials have thick walls to withstand repeated ball pestle impacts. Exterior ends have ribbed structures for greater impact resistance. Use for blending powders and comminuting relatively soft sample substances. Tabs on friction-fitting lids are easy to disassemble. Methyl methylmethacrylate ball pestles are suggested.
Specifications and Ordering Information
| CATALOG NO | RECOMMENDED SAMPLE QTY | LENGTH | DIAMETER | RECOMMENDED BALL PESTLES | QTY/PKG |
|---|---|---|---|---|---|
| 1121 | 1-2 cm3 | 48mm | 15mm | 1205 | 100 sets |
| 1122 | 2-5 cm3 | 48mm | 22mm | 1207 | 100 sets |
| 1133 | 5-10 cm3 | 75mm | 26mm | 1208 | 100 sets |
| 1134 | 10-20 cm3 | 75mm | 33mm | 1211 | 100 sets |
Reg. US Patent: 4,402,909.
Stainless Steel SpectroVials®
General purpose comminuting and blending vials. Use for grinding moderately hard sample materials. Threaded caps have concaved interior ends. Stainless steel ball pestles suggested.
Specifications and Ordering Information
| CATALOG NO | RECOMMENDED SAMPLE QTY | LENGTH | DIAMETER | RECOMMENDED BALL PESTLES | QTY/PKG |
|---|---|---|---|---|---|
| 1161 | 1-2 cm3 | 51mm | 16mm | 1245 | 1 unit |
| 1162 | 2-5 cm3 | 51mm | 22mm | 1247 | 1 unit |
| 1173 | 5-10 cm3 | 76mm | 26mm | 1248 | 1 unit |
| 1174 | 10-20 cm3 | 76mm | 27mm | 1251 & 1252 | 1 unit |
| 1175 | 10-30 cm3 | 66mm* | 54mm | 1247 & 1252 | 1 unit |
* Supplied as a single open-ended
Rust Resistant Stainless Steel SlipFitTM SpectroVials®
Fabricated from a highly rust resistant grade of stainless steel. General purpose comminuting and blending vials. Use for grinding moderately hard sample materials. Interior ends are concaved and both halves are designed to easily slip on and off for easy and fast clean-ups. Stainless steel ball pestles suggested.
| CATALOG NO | RECOMMENDED SAMPLE QTY | LENGTH | DIAMETER | RECOMMENDED BALL PESTLES | QTY/PKG |
|---|---|---|---|---|---|
| 1143 | 1-8 cm3 | 55mm | 22mm | 1247 | 1 unit |
| 1146 | 5-15 cm3 | 84mm | 38mm | 1252 | 1 unit |
| 1149 | 12-30 cm3 | 94mm | 56mm | 1252 | 1 unit |
Titanium Carbide SpectroVials®
An exceptionally hard material with a Rockwell "C" hardness similar to tungsten carbide makes these vials exceptionally suited for grinding very hard sample substances. This material is prone to fracture and is supplied without any warranty expressed or implied. Threaded ends are concaved. Tungsten carbide ball pestles suggested.
Specifications and Ordering Information
| CATALOG NO | RECOMMENDED SAMPLE QTY | LENGTH | DIAMETER | RECOMMENDED BALL PESTLES | QTY/PKG |
|---|---|---|---|---|---|
| 1151 | 1-2 cm3 | 51mm | 16mm | 1235 | 1 unit |
| 1152 | 2-5 cm3 | 51mm | 22mm | 1236 | 1 unit |
| 1153 | 5-10 cm3 | 76mm | 26mm | 1237 | 1 unit |
| 1154 | 10-20 cm3 | 76mm | 27mm | 1238 & 1239 | 1 unit |