SDF-4.00-100: SpectroCertified® Sulfur in Diesel Fuel Standard, Conc. 4.0000 wt%, 100ml
For applications where there is little need to acquire complete sets of standards for monitoring the sulfur content in mineral, diesel or residual oil, single-element sulfur SpectroStandard® Sulfur Standards are available. Each standard is formulated in its respective matrix with Di-N-butyl sulfide and accompanied with appropriate SpectroCertified® Certificate of Analysis. Supplied in 100cc quantities in glass bottles unless stated otherwise.
• High purity sulfur standards
• Available in individual units and sets
• Choice of mineral oil, residual oil, diesel fuel, lubricating oil, waste oil matrices
• Accompanied with Certificate of Analysis
Single-element SpectroStandards® sulfur standards are used for monitoring the sulfur content in mineral oil, diesel or residual fuels. They are offered in a comprehensive assortment and concentration spreads closely anticipating to normally expected values. Each standard is formulated in its respective matrix with Di-N-butyl sulfide and accompanied with an appropriate SpectroCertified® Analysis certificate. Supplied in 100cc quantities in amber glass bottles.
Sulfur Single-Element SpectroStandards® Mineral Oil Matrix; weight percent basis:
Formulated with Di-N-butyl sulfide diluted to convenient concentration levels with mineral oil conforming to ASTM-D2622 and D4294.
Sulfur Single-Element SpectroStandards® Mineral Oil Standards; PPM Basis
Formulated with Di-N-butyl sulfide diluted to concentration with mineral oil conforming to ASTM-D7039.
Sulfur Single-Element SpectroStandards® Synthetic Diesel Fuel Matrix; weight percent basis:
Formulated with Di-N-butyl sulfide concentrate diluted to convenient concentration levels with synthetic diesel fuel Oil. SDF7 conforms to ASTM-D4294 and SDF10 to ASTM D4294 and D2622 methods.
Sulfur Single-Element SpectroStandards® Residual Oil Matrix; weight percent basis:
Formulated with Di-N-butyl sulfide concentrate diluted to convenient concentration levels with residual oil in conforming to ASTM-D2622 and D4294-98 methods.
*Ships up to 10 business days
® SpectroCertified, SpectroStandards and Chemplex are registered trademarks of Chemplex Industries, Inc.
Yes |