CLWO7: Non-Aqueous Spectrocertified® Sulfur and Chlorine Standards

CLWO7: Non-Aqueous Spectrocertified® Sulfur and Chlorine Standards

ULSDO-25: Ultra Low Sulfur SpectroStandards® Diesel Fuel Sets: Sulfur with Ultra Low Diesel Fuel concentrations of 0, 5, 10, 15, 20 and 25ppm; 100ml each

ULSDO-25: Ultra Low Sulfur SpectroStandards® Diesel Fuel Sets: Sulfur with Ultra Low Diesel Fuel concentrations of 0, 5, 10, 15, 20 and 25ppm; 100ml each

SRO10: SpectroCertified® Sulfur in Residual Oil Standard set, Conc. 0.25, 0.50, 1.00, 1.50, 2.00, 2.50, 3.00, 3.50, 4.00 & 5.00 wt%, 100ml each

$0.00
Availability: In stock
SKU
SRO10

Chemplex Industries, Inc. offers a unique assemblage of specially formulated sulfur standard reference materials in mineral and diesel fuel oil and chlorine in waste oil matrices in convenient concentration spread sets. Supplied in 100 cc quantities in glass bottles unless stated otherwise.

Chemplex Industries, Inc. offers a unique assemblage of specially formulated sulfur standard reference materials in mineral and diesel fuel oil and chlorine in waste oil matrices in convenient concentration spread sets. Supplied in 100 cc quantities in glass bottles unless stated otherwise.

Sulfur Spectrostandard© Mineral Oil Sets

Formulated with Di-N-butyl sulfide diluted to convenient concentration levels with mineral oil conforming to the indicated ASTM-D2622; D4294 and D4294-98, EPA or Canadian General Standards Board CAN/GS-3.0 No. 16.0-95 methods.

Sulfur Spectrostandard® Mineral Oil Sets; PPM Basis

Formulated with Di-N butyl sulfide diluted to concentration with mineral oil conforming to ASTM-D7039.

Sulfur Spectrostandard® Synthetic Diesel Fuel Sets

Formulated with Di-N-butyl sulfide concentrate diluted to convenient concentration levels with synthetic diesel fuel Oil. SDF7 conforms to ASTM-D4294 and SDF10 to ASTM D4294 and D2622 methods. 

Ultra Low Sulfur Spectrostandard® Synthetic Diesel Fuel Sets; PPM Basis

Formulated with Di-N butyl sulfide diluted to concentration with diesel fuel

Sulfur Spectrostandard® Residual Oil Set

Formulated with Di-N-butyl sulfide concentrate diluted to convenient concentration levels with residual oil in conforming to ASTM-D2622 and D4294-98 methods.

Sulfur Spectrostandard® Formulation Sets for EPA Methods 80.580 to 80.585

Please see the Additional Information tab for details.

Sulfur Spectrostandard® Formulation Sets for EPA Methods 80.580 to 80.585

Please see the Additional Information tab for details.

Combination Set of Mineral Oil and Diesel Fuel Base Standard

A complete set comprising the sulfur content of all Mineral Oil Gravimetric and Diesel Fuel Precision standards constituting the EPA methods 80.580 to 80.585. Consists of the above-indicated sets. 

Sulfur and Chlorine in Mineral and Waste Oil Sets

Mineral Oil Base Set:

Formulated with Di-N-butyl sulfide and chlorinated hydrocarbon diluted to concentration with mineral oil. Contains 100 cc of each standard.

Waste Oil Base Set:

Formulated with Di-N-butyl sulfide and chlorinated hydrocarbon diluted to concentration with waste oil. Contains 100 cc of each standard.

Chlorine in Waste Oil Set

Chlorinated hydrocarbon in waste oil.

 

® SpectroCertified, SpectroStandard and Chemplex are registered trademarks of Chemplex Industries, Inc.

More Information

Sulfur Spectrostandard® Formulation Sets for EPA Methods 80.580 to 80.585

Mineral Oil Matrix Sets:
Sulfur in Mineral Oil Gravimetric standard for low-high level EPA requirements. Set of two (2) SpectroCertified© standards contain 200 cc quantities of each SpectroStandard.

Diesel Fuel Matrix Sets:
Sulfur in Diesel Fuel Precision standard for low-high level EPA requirements. Set of two (2) SpectroCertified© standards contain 400 cc of each SpectroStandard.

Sulfur Spectrostandard® Formulation Sets for EPA Methods 80.580 to 80.585

Mineral Oil Matrix Sets:
Sulfur in Mineral Oil Gravimetric standard for low-high level EPA requirements. Set of two (2) SpectroCertified© standards contain 200 cc quantities of each SpectroStandard.

Diesel Fuel Matrix Sets:

Sulfur in Diesel Fuel Precision standard for low-high level EPA requirements. Set of two (2) SpectroCertified© standards contain 400 cc of each SpectroStandard.


Yes
Write Your Own Review
You're reviewing:SRO10: SpectroCertified® Sulfur in Residual Oil Standard set, Conc. 0.25, 0.50, 1.00, 1.50, 2.00, 2.50, 3.00, 3.50, 4.00 & 5.00 wt%, 100ml each
Your Rating